- You cannot add "Sonoff TH16 3500W WiFi Smart Switch with Temperature And Humidity Monitoring Option" to the cart because the product is out of stock.
Sale!
Sonoff Temperature and Humidity Sensor Si7021
৳ 550.00
- Relative humidity and temperature measurement
- All calibrated, digital output
- Good long-term stability
- No additional parts required
- Ultra-low energy consumption
- The sensor is fully interchangeable
Description
Overview
Sonoff Si7021 Temperature and Humidity Sensor is a digital temperature and humidity sensor with a calibrated digital signal output. It adopts dedicated digital module acquisition technology and temperature&humidity sensing technology to ensure that the sensor has a very high reliability and excellent long-term stability. The sensor includes an integrated single-chip temperature and humidity sensor chip, which connects to a high-performance 8-bit MCU. The Si7021 sensor has advantages such as excellent quality, ultra-fast response, anti-interference ability and cost-effective. The sensor has 2.5mm 4-pole stereo audio male plug connector, which works perfectly with Sonoff TH16, S22 Socket.
Features
- Relative humidity and temperature measurement
- All calibrated, digital output
- Good long-term stability
- No additional parts required
- Ultra-low energy consumption
- The sensor is fully interchangeable
Electrical Characteristics
Rated Parameters
Parameter | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Voltage input | VCC | 2.2 | 3.3 | 3.6 | V |
Operating temp. & Measuring range | Ta | -40 | – | +85 | ℃ |
Storage temp. | Ta | -65 | – | +150 | ℃ |
Performance parameters
Parameter | Condition | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Humidity | |||||
Operating range | 0 | — | 100 | %RH | |
Accuracy | 0-80 | — | ±2 | ±3 | %RH |
80-100 | See Figure 1 | ||||
Temperature drift | — | 0.05 | — | %RH/℃ | |
Stability | — | ≤0.25 | — | %RH/yr | |
Temperature | |||||
Operating range | -40 | — | +85 | ℃ | |
Accuracy | -10≤Ta≤85 | — | ±0.3 | ±0.4 | ℃ |
-40≤Ta≤125 | See Figure 2 | ||||
Stability | — | ≤0.01 | — | ℃/yr |
Figure 1. RH Accuracy at 30℃
Figure 2. Temperature Accuracy
Hardware
Interface Description
It is recommended that the DATA pin use a 10K pull-up resistor and a 100nF capacitor can be added between the power supply pins (VCC, GND) for decoupling.
Audio Connector
Pins
Pin | Name | Description |
---|---|---|
1 | VCC | Power supply 2.2~3.6VDC |
2 | GND | GND |
3 | NC | NC |
4 | DATA | Single bus, data port |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.